Home > Hard Drive > Dell Desktop With Raid 1

Dell Desktop With Raid 1


Not following these rules could result in an unsupported configuration. I am PC so if that is the case I will need to explore some more). Job done Reply Paul says: July 25, 2015 at 11:06 pm Very helpful info - thanks. Posted on 2008-11-15 17:18:19 scottish I apologize for reviving this post, but I have to say that I am SO appreciative in regard to Jeff Stubbers and his answers to my http://maccomputersupply.com/hard-drive/replace-hdd-with-ssd-desktop.html

Tools Now as the troubles of the hard disk are identified, so it is the times for a short description of the tools that are required to trouble shoot the devices But there's so much mindset in place with RAID that people have difficulty accepting the fact that it's really just a waste of money for many, if not most, of its This seems to be the best case scenario for a drive failure in a mirrored RAID array (i.e. If so, what are the steps I should take to format it on my windows machine before take it to the data center? (2). https://www.examcollection.com/certification-training/a-plus-how-to-troubleshoot-hard-drives-and-raid-arrays-and-troubleshooting-tools.html

Dell Desktop With Raid 1

Kitts und Nevis St. Google's landmark research document, "Failure Trends in a Large Disk Drive Population," published in 2007, provided a huge amount of information about consumer-grade SATA and PATA drives used in the company's Common symptoms Here are some common symptoms of the hard drive and the RAID arrays failures; Read/write failure Any reading or writing needs a storage device. If you have more than 2TB to backup then restoring redundancy would be your best bet, thus the sooner a hot spare is taken into rebuild the better!

I do not have an off site backup for the general system. I used to but have not recently, switched hard drives every 6 months to a safe deposit. He earned his B.A. Asus Motherboard Raid Unfortunately, it is not as clear of a number when it comes down to how many RAID failures there have been.

Just remember that I am taking this position due to experience. How are they set up and what hardware are they? Probabilty of a disk failure is higher, but probability of two simultaneous disk failures is much less. http://www.dell.com/support/article/SLN155075/en I assume it was rebuilding the Array due to some form of data corruption from suddenly loosing power or something.

hyped-4 by two fold. Motherboard Raid 5 Any single hardware RAID option is superior to a single external drive and I would feel much better having a good RAID 5 setup over multiple external USB drives. Gamers like RAID since the game is never waiting to load data, or if it is waiting, the wait is less than it would be otherwise. 2) Data Security - RAID If you're working with HD video and need to be able to save 2-3TB of data, then a RAID array is necessary to have a working space that large.

Raid 1 Hard Drive Replacement

Thanks to Falko and the other helpful posters.

From: Stephen Jones Reply Class tutorial - just repaired a failed drive remotely (with a colleagues assistance at the location) flawlessly Using longer, or non-certified cables is not supported. Dell Desktop With Raid 1 You should also have some mechanism for actively monitoring the array, with notifications being sent to you in the event of a drive failure, so that you can immediately replace the Raid Support Motherboard Posted on 2008-05-23 21:53:27 Giaour I use RAID solutions on my workstations at home but I also use enterprise level hardware (SCSI / separate controller / etc.).

The best best option is to use TWO SEPARATE DRIVES for backup and let Time Machine do the work and eliminate the complexity of the RAID. If you want errors to be forwarded to the system event log, refer to the HBA documentation to see if it supports this feature. RAID levels 2, 3, and 4 are not commonly used anymore. I don't know if you can have a RAID back up with a separate non-RAID OS disk setup. Motherboard With Raid Controller

I embrace the concept of backup being more than drive failure replacement. So if you accidentally delete a file, it will instantly be removed from both mirrored copies. Other deals offer 1 TB at $50 a year unlimited machines and there are offers with Synology now for some cloud backup that is very reasonable such as $10 TB per Many thanks for this piece, it helps to know that Im not the only one with this eternal headache!

Reply Gregory Hughes says: August 5, 2014 at 3:01 pm Thanks for this article Pete - PERFECT timing for me and I plan to adapt this myself. Non Raid Disk Repair Here is a short and effective narration of the common symptoms that indicates a damaged or trouble making hardware of any computer system. The program makes the drive write very weak magnetic patterns onto the disk surface and tests to see if it can then read them back.

A RAID system IS a single point of failure in the case of a power-surge, so you should consider it could die every day.From our experience shutting down/booting a system poses

Data backup involves random seeking. In other words, the world's most popular operating system for the better part of a decade didn't support 4KB blocks, which put a huge crimp in the industry's efforts to expand Are you using Time Machine for backups or making bootable backups with something like SuperDuper? How Many Pins Are In An Sata Data Connector Posted on 2007-02-12 08:24:28 Jon Bach Yep, that'd be a perfect use of a disk imaging software.

If this process happens once by accident and never repeats in the near future, then this is just a blockage of the hardware. Posted on 2016-05-13 12:53:25 AustinM With two drives in a RAID 0 configuration, data loss occurs when either drive A *OR* drive B fails. And believe me, when I say it's not fun, I will go further and say I've had more than one disk die at the same time. Remember that hard disks are mechanical devices with are expected to fail eventually.

Much of this remains relevant when formulating disk drive failure reduction strategies today. A couple of gotchas in my case (using lilo and sata drives, failed device sda): lilo must be patched and drive must be ejected in order for machine to be re-boot-able You may have problems with the array listed in multiple log files (system and HBA). Apparently, the problem you are facing does not concern the software, as the message didn’t come from the software, but from RAID controller during the beginning of the boot.

It's also recommended, in a case it is really critical to have your solution synchronized with another storage enclosure. I have my Vista on a RAID 0 setup, but I don't see a huge performance boost over using a single drive, especially in every day applications. He and I get equal load times for the Operating System and Apps.

© Copyright 2017 maccomputersupply.com. All rights reserved.